Redditch ZigBee module features:

      The Radioland ZigBee module currently includes 2530A1, 2530A2, 2530PA1, 2530PA2 and related mating boards. It is based on TI's CC2530F256 chip and runs ZigBee module of ZigBee2007/PRO protocol. It has all the features of ZigBee protocol, which is different from other types. The ZigBee module (may not run the Full ZigBee2007 protocol, because the ZigBee2007 protocol requires 256K of FLASH space to run). 

      Automatic networking, power-on and use is the main feature of the 2530 series ZigBee module. In view of the current product development schedule requirements and rapid market changes, Reddy Technology has launched an automatic network, power-on ZigBee module, users do not need to understand the complex ZigBee protocol, all ZigBee protocol processing part, The ZigBee module is automatically completed internally, and the user only needs to transmit data through the serial port. It is the easiest way to apply ZigBee on the market.

Main Feature:

     The 2530 Series ZigBee module can be visually understood as a

  “wireless serial connection”, so using this module is as simple as using a serial cable.

l Easy to use: no need to consider the ZigBee protocol, transparent transmission of serial data;

l Automatic networking: All modules are automatically networked when they are powered on. The Coordinator automatically assigns addresses to all nodes. It does not require users to manually assign addresses, network joins, responses, and other professional ZigBee networking processes.

l Simple data transfer:

Serial data transmission: The data received by the Coordinator from the serial port is automatically sent to all nodes. The data received by all nodes from the serial port is automatically sent to the Coordinator.

The data transmission can be performed between the coordinator and the designated node through the serial port. The format of the data transmission is: 0x02 0xA8 0x79 0xC3 (data transmission command) + 0x73 0x79 (target address) + (data).

Unique IEEE address: The TI CC2530F256 chip used in the 2530 series module has its own IEEE address at the factory. Users do not need to purchase an IEEE address separately. The IEEE address (MAC address) can be used as the identifier of the ZigBee module.

The user can change the radio channel: the user can change the radio channel used by the module through the serial port command.

Support low-power nodes, set the node wake-up mode by instruction, the default is interrupt wake-up, the transparent transmission module can only wake up by P0_5 pulse interrupt. P0_5 is normally at a high level, pull it low for more than 50 milliseconds, and then pull it back high, which is a pulse interrupt. After the module wakes up, it can only go to sleep through the sleep command.Redditch ZigBee module features:

        The Radioland ZigBee module currently includes 2530A1, 2530A2, 2530PA1, 2530PA2 and related mating boards. It is based on TI's CC2530F256 chip and runs ZigBee module of ZigBee2007/PRO protocol. It has all the features of ZigBee protocol, which is different from other types. The ZigBee module (may not run the Full ZigBee2007 protocol, because the ZigBee2007 protocol requires 256K of FLASH space to run). 

Redditch ZigBee module features:

        The Radioland ZigBee module currently includes 2530A1, 2530A2, 2530PA1, 2530PA2 and related mating boards. It is based on TI's CC2530F256 chip and runs ZigBee module of ZigBee2007/PRO protocol. It has all the features of ZigBee protocol, which is different from other types. The ZigBee module (may not run the Full ZigBee2007 protocol, because the ZigBee2007 protocol requires 256K of FLASH space to run). 

        Automatic networking, power-on and use is the main feature of the 2530 series ZigBee module. In view of the current product development schedule requirements and rapid market changes, Reddy Technology has launched an automatic network, power-on ZigBee module, users do not need to understand the complex ZigBee protocol, all ZigBee protocol processing part, The ZigBee module is automatically completed internally, and the user only needs to transmit data through the serial port. It is the easiest way to apply ZigBee on the market.